OX-MASTER 220 Oxalic Acid Evaporator
 1. Connect the evaporator to the power supply and wait 2 minutes for it to heat up.
 2. Place the evaporator in front of the cabinet so that the exhaust pipe points toward the cabinet exit.
 3. Squeeze the dispenser into the prepared oxalic acid until it is full.
 4. Place the dispenser into the opening at the top of the kettle and press the button on the top of the dispenser.
 5. The temperature drops by 10-15 degrees as sublimation continues.
 6. When the temperature starts to rise, it is a sign that the oxalic acid has sublimed and we can go to the nearest beehive.
 7. The dispenser can be pulled out and refilled.
 8. After work is completed, disconnect the appliance from the power source.

 Maintenance : The dispenser should be washed with plenty of water after treatment, as the oxalic acid adhering to it can stick together.
 Mains voltage: 230V/330W
 •Patented
 •CE certified
 The power amplifier tube has a diameter of 6 mm
 During use, a protective mask, gloves, and safety glasses must be worn. The enclosed instructions include a recommendation for the appropriate protective mask. We recommend the use of oxalic acid tablets.